Skip to content
Anon Wallet

FAQ

This page gives short answers to common questions about Anon. Each answer ends with a link to the page that explains it in full.

These terms appear in many answers:

  • Your private balance is held in the pool of Railgun, a privacy protocol. The pool is a shared smart contract that hides which funds belong to which user.
  • To shield is to move tokens from a public address into your private balance. To unshield is to move tokens from your private balance to a public address.
  • A public address starts with 0x. A private address starts with 0zk.
  • A stealth account is an extra public address that Anon creates from your wallet.
  • The network fee, also called gas, is the fee that a transaction pays to the network.
  • Your recovery phrase is the list of 12 or 24 words that is the backup of your wallet.

Privacy

What does Anon hide, and what stays public?

Anon hides what happens inside your private balance. A private send from one private address to another hides the sender, the recipient, the token and the amount. A shield and an unshield are public: anyone can see the address, the token, the amount and the time. Anon does not make you anonymous, because equal amounts and close timing can connect a shield to a later unshield. See How Transactions Get Linked.

If I shield and then unshield to a new address, can the two addresses be linked?

Yes, they can be, but only by comparison and not by proof. The pool hides which shield paid for which unshield. Both transactions are public, so an observer can compare the amounts and the times, and when few other shields fit, a guess is usually correct. A transfer between the two addresses, even a small one to pay network fees, connects them permanently. See How Transactions Get Linked.

Do I need a second Railgun wallet between the shield and the unshield?

No. Shield your funds, wait, then unshield directly to the new address. A transfer inside the pool, from one private address to another, does not show the sender, the recipient or the amount, so an extra step through a second Railgun wallet adds nothing that an observer can see. What matters is how you shield and how you unshield, not how many private wallets the funds pass through. See Move Funds Away From an Exposed Address.

How long should I wait before I unshield, and does the amount matter?

A new shield cannot be spent for about one hour, and for privacy you should wait longer than that. Days are better than hours, because more shields by other people arrive in between. Yes, the amount matters: it is usually the strongest signal. Do not unshield the amount that you shielded, the same amount after fees, or parts that add up to it within a short time. See How Transactions Get Linked.

What is the crowd or anonymity set, and why does the token matter?

The crowd is the list of shields that could have paid for an unshield. Privacy researchers call it the anonymity set. It is counted for each network and each token, so a token that few people shield has a small crowd, whatever the amount. The crowd has no fixed size, and Anon does not show its size today. See How Transactions Get Linked.

Does a username reveal my address?

Yes. A username is a public name such as alice.anon.buzz, and its profile publishes your wallet's public address and your private address. Anyone can also find the name from your public address, but a username does not reveal your private balance, your private transfers or your stealth accounts. If you want no public name, choose a private account, which has no name, when you create the account, because the apps cannot change this choice later. See .anon.buzz Usernames.

Addresses and Accounts

What is the difference between my 0x address and my 0zk address?

Your 0x address is your wallet's public address: its balance and every transfer are public. Your 0zk address is your private address: only shields and unshields are public, and the balance and the transfers inside the Railgun pool are hidden. You have one of each, and Receive shows them under Public and Private. People can send to your 0zk address without seeing your balance. See Stealth Accounts.

Can I have more than one public address?

Yes. Create a stealth account in the app named Stealth: it is a normal 0x address on a network that you choose. You can create as many as you need and give a different one to each person, exchange or wallet that pays you. A stealth account is not private, because its balance and every transfer are public. See Stealth Accounts.

Can I send from MetaMask or an exchange directly to a stealth account?

Yes. Copy the stealth account's address and send to it as to any other address, on the network that the account was created on. The transfer is public, and it connects the sending address to that stealth account. To move the funds into your private balance, open the account and choose Withdraw. See Stealth Accounts.

Can my main address pay the gas for my stealth accounts?

No, your main address does not pay for them. Where the app offers Private (on mobile, Private fee), the fee is taken from your private balance, and the stealth account needs no balance for fees. With Public (on mobile, Public fee), the stealth account pays for itself in the network's native token (ETH, POL or BNB). Give it that token from your private balance and never from your wallet's public address, because a transfer between the two addresses connects them permanently. See Stealth Accounts.

What is a gas account?

A gas account is a separate public address that you fund from your private balance so that it can pay the network fees of your private transactions. It exists in the extension only, for a wallet with a recovery phrase, on Ethereum, Arbitrum, Polygon and BNB Chain. Its address is public as the sender of every transaction that it pays for, so reusing it shows that those transactions belong together. It cannot pay for an unshield to another person's address. See Network Fees and the Paymaster.

Is there a deposit address that shields automatically?

No, not today. You shield manually. Receive at your wallet's public address and then use Shield, or receive at a stealth account and then choose Withdraw. See Shielding & Unshielding.

Shielding and Fees

Why can I not spend right after I shield?

A new shield cannot be spent for about one hour. During that time, Railgun's Private Proofs of Innocence (PPOI) system checks the new funds against lists that independent list providers keep. Anon lists the funds under Shielding tokens (on mobile, Shielding Tokens), and they become spendable without any action from you. The wait is the same for every user. See Shielding & Unshielding.

What does "Blocked" mean?

Blocked means that the Private Proofs of Innocence system did not accept a shield. Blocked funds cannot be spent privately, and they can only be returned to the address that paid them in. The shield fee is not refunded, the unshield fee is taken from the returned tokens, and your wallet's public address pays the network fee. To start, choose Return shield in the extension, or tap the blocked item on mobile and choose Return to wallet. See Compliance & POI.

What does it cost to shield, unshield and swap?

A shield and an unshield each cost about 0.38% of the amount: a 0.13% Anon fee and a 0.25% Railgun fee. A private swap, which is a swap from your private balance, unshields, trades and shields in one transaction, so it pays these fees and a 0.30% Anon swap fee, about 1.06% in total. A public swap, which is a swap from a public address, pays an Anon swap fee of 0.50% and no shield or unshield fees. Every transaction also pays a network fee, and the review screen shows the amounts before you confirm. See Swapping Tokens.

Which networks have a private balance, and does Base work?

Anon supports private balances on five networks: Ethereum, Arbitrum, Polygon, BNB Chain and Base. Yes, you can shield on Base. At the start only Ethereum and Arbitrum are on, so turn on a network in Settings, under Networks, before you use it. Each network has its own pool, and private funds do not move between networks without leaving the pool. See Settings & Configuration.

Anon's Services

Who runs the relay and the paymaster, and can I run my own relay?

Anon operates both: the paymaster, and the default relay at relay.anon.inc. The paymaster is the service that submits your transaction and pays the network gas when you pay a private fee. The relay passes your encrypted requests on to the paymaster: it sees your IP address but cannot read them, and this separation depends on Anon not combining what its two services see. You can run your own relay from Anon's public code and set it in Settings → Connection privacy → Relay, and it still forwards to Anon's paymaster. See Private Paymaster Relay.

Does Anon use Railgun broadcasters?

No, not today. In the wider Railgun ecosystem, a broadcaster is an independent operator that submits private transactions for users and takes a fee. Anon's apps do not connect to that network and do not let you choose a broadcaster: Anon's paymaster, or one of your own accounts, submits a private transaction. The label Broadcaster Fee (on mobile, Broadcaster fee) in transaction details is the fee paid to the party that submitted the transaction, which in Anon is the paymaster. See Network Fees and the Paymaster.

What can Anon's servers see?

They do not receive your keys or your recovery phrase. The server that receives your connection sees your IP address and the time of the request. The paymaster also reads each transaction that you ask it to submit, and the Private Proofs of Innocence service receives blinded commitments, which are codes derived from your private funds. Anon's account service stores your public address and your 0zk address. See Wallet Syncing.

Hardware Wallets

Does Anon work with a Ledger?

Yes, with a Ledger Flex or a Ledger Nano S Plus, in the extension and in the mobile app (version 1.4.8 or later). A Ledger is a hardware wallet: the keys that can spend stay on the device, and it signs a transaction only after you approve it there. Shield, unshield and private send work on every network where Anon has a private balance, but on an iPhone only the Ledger Flex connects, because the Nano S Plus has no Bluetooth. For a new account in the extension, choose I already have an address and then Connect a hardware wallet. See Using a Ledger.

Why do I install the RAILGUN app from Anon and not from Ledger Wallet?

The RAILGUN app, the app on the Ledger that signs private actions, is not yet in the app catalog of Ledger Wallet, Ledger's own app. Railgun is working with Ledger to list it, and there is no date. Until then, Anon installs the app on your Ledger directly, and you check the installer and the app on the device before you approve. The source code of the app on the device is not public yet, and Anon cannot refer you to a published audit of it. See Using a Ledger.

Is Trezor supported?

No, not today. A Trezor does not accept add-on apps (plugins) yet, so Railgun on a Trezor would need custom firmware (changed system software) on the device. Anon has no date for Trezor support. See Using a Ledger.

Apps, Backup and Recovery

Is there a mobile app, and can I use the same wallet on my phone and in my browser?

Yes. Anon is a browser extension for Chrome, Brave and Edge and a mobile app for iPhone, iPad and Android, and you can use one or both with the same wallet. To copy a wallet from the extension to your phone, choose Import from extension on the phone and open Settings, then Mobile Sync, in the extension. You can also restore the same recovery phrase in each app, and for a wallet on a Ledger you choose Connect a Ledger on the phone. See Installation.

Is the wallet open source?

No, not yet. The code of the Anon extension and of the Anon mobile app is not public today. Anon plans to publish its code in steps, and some code is public already: Anon's paymaster relay, and the connector, the library that Anon uses to talk to a Ledger. The Railgun protocol's smart contracts and cryptographic circuits are open source and have been audited by independent firms. See Security Overview.

What do I need to back up?

You need to back up your recovery phrase. If you used the advanced options to add a passphrase or to change the account index, write them down with the phrase, because a restore without them opens a different, empty wallet and no message warns you. Write the values on paper and keep them private, because anyone who has them controls your funds. For a wallet on a Ledger, the backup is the Ledger's own recovery phrase, and Anon has no copy of it. See Key Management.

What happens if I lose my phone or my computer?

Your funds are not lost if you have your recovery phrase. Install Anon on another device and restore the wallet with the phrase, and with the passphrase and the account index if you set them. Your addresses, your private balance and your Anon account return when the wallet syncs, but contacts, connected sites and app settings do not, because they are stored on the device. Without the recovery phrase, nobody can restore the wallet, and Anon cannot do it for you. See Key Management.

Do my stealth accounts come back when I restore?

Yes, for every account that you funded from your private balance at least once. Stealth accounts come from your recovery phrase, or from your Ledger, and Anon looks for them again while it syncs. An account that only ever received funds from outside can be missing from the list, so withdraw from it or export its key before you remove the wallet from a device. Its funds stay at its address, and account names do not come back. See Stealth Accounts.

Where is my wallet stored, and is it encrypted?

Your wallet is stored on your device, not on Anon's servers. The recovery phrase is stored encrypted, and only your unlock method, for example a passkey, a password, biometrics or a PIN, opens it. Some other data, for example your settings, is stored without Anon's own encryption. See Encryption.